Cases, Bases, and Cabinets
Advice
Ordering
Contact me
Drawers
Tool-Boxes
Cabinets and Tables
Complete Cases
Case Lids
Bases
Extension Tables
Tool Box Lids (that fit into bases)
Page updated 24th June 2022, Midsummer day, this is absolutely all I have, folks!Drop-in Wooden Lids
Slide-in Wooden Lids, and Slides
Flat Ply Lids
Plastic Lids
Parts and Oddments
Metal Tool Box Lids
The smaller (7 inch) is for 3/4 size machines (128, 28, 99, 185) the larger (7-1/4 inch) for full-size machines (15, 66, 201 etc..)..Dimensions in inches, or mm, see notes with each lid
There are four colours - Black, brown, tan and green. I almost never have green ones...
BOTBL008a Black; £12
Sorry, all gone...
Small
BOTBL009A Black, good; £10
BOTBL009B Brown, good; £10
BOTBL009C Tan, very good; £10
BOTBL009E Black with wooden knob instead of the turn-key; £10
BOTBL010 Black, from kneebar machine 3/4 sized (no knob), good; £5
BOTBL011 Full-sized the same; £5
Drop-in Tool Box Lids
BOTBL077 Singer 3/4 shuttle machines, wooden knob; £8.50
BOTBL078 Singer Full-sized shuttle machine; £10
BOTBL081 Small wood knob and clip, 176 x 68mm; £5
BOTBL081 Clip
BOTBL082 Home-made (not by me) Full-sized Singer with "orrible clip"; £4
BOTBL082 Under
BOTBL080 BSM, 177 x 85mm; £6
BOTBL075 Drop-in with knob; £6
BOTBL018 Wood, nice knob, chipped corner; £6
BOTBL002 Wood with nice knob, 7-1/2 x 3 inches; £3.50
BOTBL019 Drop-in wood 182 x 50 mm, nice knob; £5
BOTBL039 Like a Singer 28, but bigger, 182 x 80 x 6 mm; £5
BOTBL041 Odd slot-in lid with clip (I think the clip is to hold a screwdriver) and nice metal knob; 175x45 mm over all, slots into 165x35 mm hole; very good; £6
BOTBL041 Underneaths
BOTBL050 With solid metal "clip", hole size 162 x 60 mm, nice knob; £6
Slide-in Tool Box Lids, and Slides
Note that if I can match these as sets, I do so, so these don't match unless shown together
BOTBL083 185 x 62 mm; £5
BOTBL084 Naumann VS, 150 x 55 mm; £8
BOTBL087 180 by 58/69 mm; £4.50
BOTBL088 171 x 58/68 mm; £4.50
BOTBL089 148 x 70/78 mm, warped; £2
BOTBL090 163 x 58/65 mm; £4.50
BOTBL091 Slides, chunky, 174 mm, 72 mm; £3
BOTBL043 Singer slide-in;167 x 67 mm; £8.50
BOTBL043a As 043 with the grooved bits (these tend to scruffiness and will need to be glued in place); £12.50
BOTBL034 Wood, with metal slides and pincushion and bits, 6-3/4 by 2-3/4 inches; £12.50
BOTBL038 Slide with chamfered edge, 163 x 67 x 3 mm; £2.50
BOTBL058 Thin slide-in with chamfered edges, 150 x 58 mm; £2.50
BOTBL060 Hengstenberg with slides, 168 x 65 mm; £9
BOTBL061 Naumann with slides, 165 x 60 mm; £9
BOTBL062 Slide-in with end, 175 x 60 mm; £5
BOTBL067 Set of slides 186 x 78 mm; £5
BOTBL064 Slide-in with end, 165 x 60 mm; £5
BOTBL065 Black slides, 178 x 78 mm; £5
BOTBL066 Slide-in with end, 140 x 53 mm; £5
BOTBL068 Slides, chunky, one longer side, would cut down, 172/160 x 72 mm; £5
BOTBL069 End slides; A (2) 77 mm; B 68 mm; C, 72 mm ;£1.50 each
BOTBL072 Slide-in with end, scruffy, 165 x 60 mm; £2.50
BOTBL071 Odd slides Grooved 172 mm, A SOLD; B 167 mm; C (3) 170 mm; £2 each
BOTBL070 Set of slides 186 x 78 mm; £5
BOTBL022 Slide, wood, round end; 8.75 x 2.625 in, good; £6
BOTBL045 Flat, slide-in, with hole, 195 x 60 mm; £2.50
Flat Plywood Tool Box Lids
BOTBL004 Curved top wood, 7-3/8 x 2-7/8 inches; £3.50
BOTBL003 Plywood with magnet, 8 x 3 inches; £3.50
BOTBL006 Plywood 7-7/8 x 2-7/8 inches; £3.50
BOTBL001 Plywood, with tiny bakelite knob, 7-3/4 x 2-1/2 inches; £3.50
BOTBL042 Flat plywood with Bakelite knob and screw fitting; 05 x 78 mm, good; £5
BOTBL037 Ply, flat, 185 x 80 x 5 mm; £2.50
BOTBL053 Ply, flat, 195 x 77 mm; £3
BOTBL054 Curved top, solid beech, 195 x 62 x 10mm; £3.50
BOTBL055 Ply, flat, 195 x 68 mm; £3
BOTBL056 Ply, flat, 202 x 77 mm; £3
BOTBL027 Wood: 7-7/8 3-7/8 inches; £5
BOTBL028 Later Singer, ply: 7-3/4 by 2-3/4 inches; £3
BOTBL029 Jones 568 Tool-box lid with magnetic "pincushion" on top; plywood; 8 by 3 inches; £3
BOTBL032 Ply 7-7/8 x 3-1/4 inches; £3
BOTBL030 8 x 3 inches; £3
Plastic Tool Box Lids
BOTBL035 Plastic toolbox lid in tan, beige, cream, another cream, grey; £3
BOTBL036 Black plastic; £3
BOTBL057 Drop-in plastic, hole size 182 x 80 mm; £3
Oddments and Bits For Tool Box Lids
BOTBL051 John part-made these from nice solid wood, for Singer shuttle machines. Ready to finish by you, with a knob; £5 each
BOTBL073 Roller tool-box lid with pincushion and metal slides, very complicated; £10
BOTBL052 Beech knobs with dowels, 23 x 14 mm; £1.50 each
BOTBL085 Knobs (which need screws) 50p each
BOTBL012 sprung catch for toolbox lid; £1.50
BOTBL013 sprung catch for toolbox lid; £1.50
BOTBL021 button for toolbox lid catch; £1.00
Helen Howes
Helen Howes Sewing Machines
1 Castell Farm Cottages, Thurlton Road, Raveningham, Norfolk NR14 6NY. UK
07914 676182
Email me here - helen@helenhowes-sewingmachines.co.uk
I prefer that you email me (at any time), or phone between 3 and 6 (UK time) most days